EasyLine DIP switch C HE


For installation in compact luminaires

Compact casing design with optional strain relief for independent operation.

Product benefits

  • High-efficiency design
  • Product guarantee: 5 years
  • Selectable output current via DIP switch
  • Very low ripple: < 5%
  • Long service life: up to 100.000 hrs.

Choose a variant:

EasyLine DIP switch C HE

Ref. No. Type Max. output power at AC operation Family data sheet Isolation primary - secondary Length Width Height Weight
187635 ECXe 500.764 20 W SELV 97 mm 43 mm 23 mm 69 g
187636 ECXe 700.765 28 W SELV 97 mm 43 mm 23 mm 69 g
187637 ECXe 900.766 36 W SELV 97 mm 43 mm 23 mm 75 g
187638 ECXe 1050.767 42 W SELV 97 mm 43 mm 23 mm 75 g
Ref. No. Type Max. output power at AC operation Output current Min. output voltage Max. output voltage Output ripple (100 Hz) SVM value Current setting / Configuration Output current tolerance – Output current tolerance +
187635 ECXe 500.764 20 W
20 V 20 V 20 V 20 V
40 V 40 V 40 V 40 V
3 % < 0.4 DIP switch -5 % 5 %
187636 ECXe 700.765 28 W
20 V 20 V 20 V 20 V
40 V 40 V 40 V 40 V
3 % < 0.4 DIP switch -5 % 5 %
187637 ECXe 900.766 36 W
20 V 20 V 20 V 20 V
40 V 40 V 40 V 40 V
3 % < 0.4 DIP switch -5 % 5 %
187638 ECXe 1050.767 42 W
20 V 20 V 20 V 20 V
40 V 40 V 40 V 40 V
3 % < 0.4 DIP switch -5 % 5 %
Ref. No. Type Max. output power at AC operation Min. voltage Max. voltage Min. input voltage AC Max. input voltage AC Min. mains frequency Max. mains frequency Input current at 230 V AC with max. load Power factor at full load (230 V) Efficiency at full load (230 V) THD at full load (230 V) Standby power No-load standby power Inrush current Inrush current time at 50% Ipeak Time to light on in AC operation
187635 ECXe 500.764 20 W 220 V 240 V 198 V 264 V 50 Hz 60 Hz 95 mA 0.97 0.935 6 % no standby operation possible ≤ 0.4 W 17 A 220 µs 150 ms
187636 ECXe 700.765 28 W 220 V 240 V 198 V 264 V 50 Hz 60 Hz 140 mA 0.97 0.935 7 % no standby operation possible ≤ 0.4 W 17 A 220 µs 150 ms
187637 ECXe 900.766 36 W 220 V 240 V 198 V 264 V 50 Hz 60 Hz 180 mA 0.97 0.935 8 % no standby operation possible ≤ 0.4 W 25 A 300 µs 150 ms
187638 ECXe 1050.767 42 W 220 V 240 V 198 V 264 V 50 Hz 60 Hz 210 mA 0.97 0.935 7 % no standby operation possible ≤ 0.4 W 25 A 300 µs 150 ms
Ref. No. Type Max. output power at AC operation
187635 ECXe 500.764 20 W
187636 ECXe 700.765 28 W
187637 ECXe 900.766 36 W
187638 ECXe 1050.767 42 W
Ref. No. Type Max. output power at AC operation Dimmable DALI power supply integrated DALI power supply switchable Min. dimming level Max. dimming level
187635 ECXe 500.764 20 W No No No 100 % 100 %
187636 ECXe 700.765 28 W No No No 100 % 100 %
187637 ECXe 900.766 36 W No No No 100 % 100 %
187638 ECXe 1050.767 42 W No No No 100 % 100 %
Ref. No. Type Max. output power at AC operation Isolation primary - secondary Open circuit voltage (Umax.) Protection against transient main peaks L–N Leakage current over PE
187635 ECXe 500.764 20 W SELV 60 V 1 kV 0.5 mA
187636 ECXe 700.765 28 W SELV 60 V 1 kV 0.5 mA
187637 ECXe 900.766 36 W SELV 60 V 1 kV 0.5 mA
187638 ECXe 1050.767 42 W SELV 60 V 1 kV 0.5 mA
Ref. No. Type Max. output power at AC operation 2D data 3D data
187635 ECXe 500.764 20 W
187636 ECXe 700.765 28 W
187637 ECXe 900.766 36 W
187638 ECXe 1050.767 42 W
Ref. No. Type Max. output power at AC operation
187635 ECXe 500.764 20 W
187636 ECXe 700.765 28 W
187637 ECXe 900.766 36 W
187638 ECXe 1050.767 42 W
Ref. No. Type
187635 ECXe 500.764
187636 ECXe 700.765
187637 ECXe 900.766
187638 ECXe 1050.767

Our partner from the USA has been developing and producing high-quality semiconductor for about 30 years. CREE has been our partner for an extensive range of LEDs since 2004. The product range includes a wide range of high brightness, high power LEDs offered in SMD as well as THT and COB technology.

Your contact: Olaf Naumann

Phone +49 (0)2842 980-211
Olaf.Naumann@vossloh-schwabe.com

Nichia from Japan, the inventor of the white LEDs, has been one of the partners of VS since 1995. The product range includes a comprehensive range of high brightness and high power LEDs, as well as a UV LED product range covering all power classes.

Your contact: Ulf Hilsenberg

Phone +49 2842 980-213
Ulf.Hilsenberg@vossloh-schwabe.com

To complement our LED range, we offer secondary optics and reflectors from our partners Carclo (www.carclo.com) and LEDiL (www.ledil.com). The product range includes a large selection of optics, optic holders and reflectors made of PMMA and silicone. We specifically stock up on a wide range of products to match the LEDs from CREE and Nichia we offer.




We develop and produce a variety of LED optics for shop, office, hall and street lighting for you. Optics are available in various designs (round, square, linear) made of high-quality materials (PMMA, silicone) and with any beam angles (narrow/wide, asymmetrical or combined).

Our partner from the USA has been developing and producing high-quality semiconductor for about 30 years. CREE has been our partner for an extensive range of LEDs since 2004. The product range includes a wide range of high brightness, high power LEDs offered in SMD as well as THT and COB technology.

Your contact: Olaf Naumann

Phone +49 (0)2842 980-211
Olaf.Naumann@vossloh-schwabe.com


Nichia from Japan, the inventor of the white LEDs, has been one of the partners of VS since 1995. The product range includes a comprehensive range of high brightness and high power LEDs, as well as a UV LED product range covering all power classes.

Your contact: Ulf Hilsenberg

Phone +49 2842 980-213
Ulf.Hilsenberg@vossloh-schwabe.com