24 V System Constant voltage

For operation of LED modules

Direct current (constant current) is always required to operate LEDs. To obtain this constant current, there are three components in each operating device (LED driver): a transformer, a rectifier and a constant current regulator. In constant voltage operation, the constant current regulator becomes a component of the LED module and is no longer a part of the operating device.

The advantages of constant voltage are the simple expandability and safety due to the safety extra-low voltage (SELV). LED modules with constant voltage can only be connected in parallel. A central supply and dimming can be realised more easily.

VS – Ideas with Systems
24 V for maximum design freedom
  • Flexible strip lighting – LED Line Flex
    – For IP67 and IP20 applications
    – Different CCTs (3000–5700 K) and RGBW

  • Linear LED module in aluminium profile AluLED
    – Slim, flat design "made in Germany"
    – For IP67 and IP20 applications
    – Different CCTs (2700–6000 K), RGB, Blue and Tuneable White
    – Plug&Play through pre-assembled connectors

  • Operating devices
    – Output range of 20 to 320 W
    – On/Off and dimmable versions (1–10 V, PUSH, DALI)
    – For IP67 and IP20 applications

  • Lighting controls
    Innovative 4-channel constant voltage dimmer for lighting control via Bluetooth®

Downloads

Our partner from the USA has been developing and producing high-quality semiconductor for about 30 years. CREE has been our partner for an extensive range of LEDs since 2004. The product range includes a wide range of high brightness, high power LEDs offered in SMD as well as THT and COB technology.

Your contact: Olaf Naumann

Phone +49 (0)2842 980-211
Olaf.Naumann@vossloh-schwabe.com

Nichia from Japan, the inventor of the white LEDs, has been one of the partners of VS since 1995. The product range includes a comprehensive range of high brightness and high power LEDs, as well as a UV LED product range covering all power classes.

Your contact: Ulf Hilsenberg

Phone +49 2842 980-213
Ulf.Hilsenberg@vossloh-schwabe.com

To complement our LED range, we offer secondary optics and reflectors from our partners Carclo (www.carclo.com) and LEDiL (www.ledil.com). The product range includes a large selection of optics, optic holders and reflectors made of PMMA and silicone. We specifically stock up on a wide range of products to match the LEDs from CREE and Nichia we offer.




We develop and produce a variety of LED optics for shop, office, hall and street lighting for you. Optics are available in various designs (round, square, linear) made of high-quality materials (PMMA, silicone) and with any beam angles (narrow/wide, asymmetrical or combined).

Our partner from the USA has been developing and producing high-quality semiconductor for about 30 years. CREE has been our partner for an extensive range of LEDs since 2004. The product range includes a wide range of high brightness, high power LEDs offered in SMD as well as THT and COB technology.

Your contact: Olaf Naumann

Phone +49 (0)2842 980-211
Olaf.Naumann@vossloh-schwabe.com


Nichia from Japan, the inventor of the white LEDs, has been one of the partners of VS since 1995. The product range includes a comprehensive range of high brightness and high power LEDs, as well as a UV LED product range covering all power classes.

Your contact: Ulf Hilsenberg

Phone +49 2842 980-213
Ulf.Hilsenberg@vossloh-schwabe.com