ComfortLine DIP switch L-R2 F16


For installation in linear luminaires

Linear LED drivers with integrated DIP switches for individual adjustment of the output current.

Product benefits

  • Flat housing design
  • Product guarantee: 5 years
  • Selectable output current via DIP switch
  • Suitable for emergency escape lighting systems acc. to EN 50172
  • Very low ripple: < 3%
  • Long service life: up to 100.000 hrs.

Choose a variant:

ComfortLine DIP switch L-R2 F16

Ref. No. Type Max. output power at AC operation Family data sheet Isolation primary - secondary Length Width Height Weight
186911 ECXe 350.375 35 W no Isolation 280 mm 30 mm 16 mm 148 g
186912 ECXe 350.376 67 W no Isolation 280 mm 30 mm 16 mm 151 g
Ref. No. Type Max. output power at AC operation Output current Min. output voltage Max. output voltage Output ripple (100 Hz) SVM value Current setting / Configuration Output current tolerance – Output current tolerance +
186911 ECXe 350.375 35 W
50 V 50 V 50 V 50 V
100 V 100 V 100 V 100 V
3 % < 0.4 DIP switch -5 % 5 %
186912 ECXe 350.376 67 W
90 V 90 V 90 V 90 V
190 V 190 V 190 V 190 V
3 % < 0.4 DIP switch -5 % 5 %
Ref. No. Type Max. output power at AC operation Min. voltage Max. voltage Min. input voltage AC Max. input voltage AC Min. mains frequency Max. mains frequency Input current at 230 V AC with max. load Power factor at full load (230 V) Efficiency at full load (230 V) THD at full load (230 V) Standby power No-load standby power Inrush current Inrush current time at 50% Ipeak Time to light on in AC operation
186911 ECXe 350.375 35 W 220 V 240 V 198 V 264 V 50 Hz 60 Hz 173 mA 0.95 0.92 14 % no standby operation possible no load operation not intended 31 A 101 µs 500 ms
186912 ECXe 350.376 67 W 220 V 240 V 198 V 264 V 50 Hz 60 Hz 312 mA 0.95 0.945 12 % no standby operation possible no load operation not intended 36 A 169 µs 500 ms
Ref. No. Type Max. output power at AC operation Min. input voltage DC Max. input voltage DC Input current at max. V DC with max. load Switching time AC - DC Switching time DC - AC Time to light on in DC operation
186911 ECXe 350.375 35 W 198 V 276 V 140 mA 200 µs 150 µs 600 ms
186912 ECXe 350.376 67 W 198 V 276 V 254 mA 200 µs 150 µs 700 ms
Ref. No. Type Max. output power at AC operation Dimmable DALI power supply integrated DALI power supply switchable Min. dimming level Max. dimming level
186911 ECXe 350.375 35 W No No 100 % 100 %
186912 ECXe 350.376 67 W No No No 100 % 100 %
Ref. No. Type Max. output power at AC operation Isolation primary - secondary Max. working voltage (Uout) Protection against transient main peaks L–N Protection against transient main peaks L/N–PE Leakage current over PE
186911 ECXe 350.375 35 W no Isolation 250 V 1 kV 2 kV 0.3 mA
186912 ECXe 350.376 67 W no Isolation 300 V 1 kV 2 kV 0.3 mA
Ref. No. Type Max. output power at AC operation 2D data
186911 ECXe 350.375 35 W
186912 ECXe 350.376 67 W
Ref. No. Type Max. output power at AC operation
186911 ECXe 350.375 35 W
186912 ECXe 350.376 67 W
Ref. No. Type
186911 ECXe 350.375
186912 ECXe 350.376
Ref. No. Type 2D data 3D data
186911 ECXe 350.375
186912 ECXe 350.376

Our partner from the USA has been developing and producing high-quality semiconductor for about 30 years. CREE has been our partner for an extensive range of LEDs since 2004. The product range includes a wide range of high brightness, high power LEDs offered in SMD as well as THT and COB technology.

Your contact: Olaf Naumann

Phone +49 (0)2842 980-211
Olaf.Naumann@vossloh-schwabe.com

Nichia from Japan, the inventor of the white LEDs, has been one of the partners of VS since 1995. The product range includes a comprehensive range of high brightness and high power LEDs, as well as a UV LED product range covering all power classes.

Your contact: Ulf Hilsenberg

Phone +49 2842 980-213
Ulf.Hilsenberg@vossloh-schwabe.com

To complement our LED range, we offer secondary optics and reflectors from our partners Carclo (www.carclo.com) and LEDiL (www.ledil.com). The product range includes a large selection of optics, optic holders and reflectors made of PMMA and silicone. We specifically stock up on a wide range of products to match the LEDs from CREE and Nichia we offer.




We develop and produce a variety of LED optics for shop, office, hall and street lighting for you. Optics are available in various designs (round, square, linear) made of high-quality materials (PMMA, silicone) and with any beam angles (narrow/wide, asymmetrical or combined).

Our partner from the USA has been developing and producing high-quality semiconductor for about 30 years. CREE has been our partner for an extensive range of LEDs since 2004. The product range includes a wide range of high brightness, high power LEDs offered in SMD as well as THT and COB technology.

Your contact: Olaf Naumann

Phone +49 (0)2842 980-211
Olaf.Naumann@vossloh-schwabe.com


Nichia from Japan, the inventor of the white LEDs, has been one of the partners of VS since 1995. The product range includes a comprehensive range of high brightness and high power LEDs, as well as a UV LED product range covering all power classes.

Your contact: Ulf Hilsenberg

Phone +49 2842 980-213
Ulf.Hilsenberg@vossloh-schwabe.com