logo

ComfortLine DIP switch L-R2

For installation in linear luminaires

Linear 1- or 2-channel LED drivers with integrated DIP switch interface for individual setting of the output current.

Product benefits

  • Product guarantee: 5 years
  • Selectable output current via DIP switch
  • Suitable for emergency escape lighting systems acc. to EN 50172
  • Very low ripple: < 3%
  • Long service life: up to 100.000 hrs.

Choose a variant:

ComfortLine DIP switch L-R2

Ref. No. Type Max. output power at AC operation Family data sheet Isolation primary - secondary Length Width Height Weight
186824 ECXe 350.331 63 W no Isolation 280 mm 30 mm 21 mm 173 g
186820 ECXe 350.327 35 W no Isolation 280 mm 30 mm 21 mm 169 g
186982 ECXe 250.410 35 W no Isolation 280 mm 30 mm 21 mm 169 g
186984 ECXe 700.412 74 W no Isolation 280 mm 30 mm 21 mm 176 g
186983 ECXe 500.411 75 W no Isolation 280 mm 30 mm 21 mm 176 g
Ref. No. Type Max. output power at AC operation Output current Min. output voltage Max. output voltage Output ripple (100 Hz) SVM value Current setting / Configuration Output current tolerance – Output current tolerance +
186824 ECXe 350.331 63 W
85 V 85 V 85 V 85 V
180 V 180 V 180 V 180 V
2 % < 0.4 DIP switch -5 % 5 %
186820 ECXe 350.327 35 W
50 V 50 V 50 V 50 V
100 V 100 V 100 V 100 V
2 % < 0.4 DIP switch -5 % 5 %
186982 ECXe 250.410 35 W
70 V 70 V 70 V 70 V
140 V 140 V 140 V 140 V
3 % < 0.4 DIP switch -5 % 5 %
186984 ECXe 700.412 74 W
50 V 50 V 50 V 50 V
105 V 105 V 105 V 105 V
2 % DIP switch -5 % 5 %
186983 ECXe 500.411 75 W
75 V 75 V 75 V 75 V
150 V 150 V 150 V 150 V
2 % < 0.4 DIP switch -5 % 5 %
Ref. No. Type Max. output power at AC operation Min. voltage Max. voltage Min. input voltage AC Max. input voltage AC Min. mains frequency Max. mains frequency Input current at 230 V AC with max. load Power factor at full load (230 V) Efficiency at full load (230 V) THD at full load (230 V) Standby power No-load standby power Inrush current Inrush current time at 50% Ipeak Time to light on in AC operation
186824 ECXe 350.331 63 W 220 V 240 V 198 V 264 V 50 Hz 60 Hz 300 mA 0.98 0.935 12 % no standby operation possible no load operation not intended 27 A 225 µs
186820 ECXe 350.327 35 W 220 V 240 V 198 V 264 V 50 Hz 60 Hz 175 mA 0.96 0.92 17 % no standby operation possible no load operation not intended 24 A 132 µs
186982 ECXe 250.410 35 W 220 V 240 V 198 V 264 V 50 Hz 60 Hz 175 mA 0.96 0.92 16 % no standby operation possible no load operation not intended 19 A 160 µs 370 ms
186984 ECXe 700.412 74 W 220 V 240 V 198 V 264 V 50 Hz 60 Hz 350 mA 0.99 0.93 10 % no standby operation possible no load operation not intended 25 A 269 µs 380 ms
186983 ECXe 500.411 75 W 220 V 240 V 198 V 264 V 50 Hz 60 Hz 355 mA 0.99 0.935 9 % no standby operation possible no load operation not intended 24 A 264 µs 382 ms
Ref. No. Type Max. output power at AC operation Min. input voltage DC Max. input voltage DC Input current at max. V DC with max. load Switching time AC - DC Switching time DC - AC Time to light on in DC operation
186824 ECXe 350.331 63 W 198 V 276 V 250 mA 550 ms
186820 ECXe 350.327 35 W 198 V 276 V 140 mA
186982 ECXe 250.410 35 W 198 V 264 V 145 mA 175 µs 120 µs 435 ms
186984 ECXe 700.412 74 W 198 V 276 V 290 mA 180 µs 125 µs 540 ms
186983 ECXe 500.411 75 W 198 V 276 V 290 mA 180 µs 125 µs 540 ms
Ref. No. Type Max. output power at AC operation Dimmable Light control / dimming DALI power supply integrated DALI power supply switchable Min. dimming level Max. dimming level
186824 ECXe 350.331 63 W No No No
186820 ECXe 350.327 35 W No
186982 ECXe 250.410 35 W No PUSH No No 100 % 100 %
186984 ECXe 700.412 74 W No No 100 % 100 %
186983 ECXe 500.411 75 W No No 100 % 100 %
Ref. No. Type Max. output power at AC operation Isolation primary - secondary Max. working voltage (Uout) Open circuit voltage (Umax.) Protection against transient main peaks L–N Protection against transient main peaks L/N–PE Leakage current over PE
186824 ECXe 350.331 63 W no Isolation 300 V 1 kV 2 kV 0.3 mA
186820 ECXe 350.327 35 W no Isolation 250 V 1 kV 2 kV 0.3 mA
186982 ECXe 250.410 35 W no Isolation 250 V 250 V 1 kV 2 kV 0.31 mA
186984 ECXe 700.412 74 W no Isolation 250 V 1 kV 2 kV 0.28 mA
186983 ECXe 500.411 75 W no Isolation 250 V 1 kV 2 kV 0.25 mA
Ref. No. Type Max. output power at AC operation 2D data
186824 ECXe 350.331 63 W
186820 ECXe 350.327 35 W
186982 ECXe 250.410 35 W
186984 ECXe 700.412 74 W
186983 ECXe 500.411 75 W
Ref. No. Type Max. output power at AC operation
186824 ECXe 350.331 63 W
186820 ECXe 350.327 35 W
186982 ECXe 250.410 35 W
186984 ECXe 700.412 74 W
186983 ECXe 500.411 75 W
Ref. No. Type
186824 ECXe 350.331
186820 ECXe 350.327
186982 ECXe 250.410
186984 ECXe 700.412
186983 ECXe 500.411
Ref. No. Type 2D data 3D data
186824 ECXe 350.331
186820 ECXe 350.327
186982 ECXe 250.410
186984 ECXe 700.412
186983 ECXe 500.411

Our partner from the USA has been developing and producing high-quality semiconductor for about 30 years. CREE has been our partner for an extensive range of LEDs since 2004. The product range includes a wide range of high brightness, high power LEDs offered in SMD as well as THT and COB technology.

Your contact: Olaf Naumann

Phone +49 (0)2842 980-211
Olaf.Naumann@vossloh-schwabe.com

Nichia from Japan, the inventor of the white LEDs, has been one of the partners of VS since 1995. The product range includes a comprehensive range of high brightness and high power LEDs, as well as a UV LED product range covering all power classes.

Your contact: Ulf Hilsenberg

Phone +49 2842 980-213
Ulf.Hilsenberg@vossloh-schwabe.com

To complement our LED range, we offer secondary optics and reflectors from our partners Carclo (www.carclo.com) and LEDiL (www.ledil.com). The product range includes a large selection of optics, optic holders and reflectors made of PMMA and silicone. We specifically stock up on a wide range of products to match the LEDs from CREE and Nichia we offer.



We develop and produce a variety of LED optics for shop, office, hall and street lighting for you. Optics are available in various designs (round, square, linear) made of high-quality materials (PMMA, silicone) and with any beam angles (narrow/wide, asymmetrical or combined).

Our partner from the USA has been developing and producing high-quality semiconductor for about 30 years. CREE has been our partner for an extensive range of LEDs since 2004. The product range includes a wide range of high brightness, high power LEDs offered in SMD as well as THT and COB technology.

Your contact: Olaf Naumann

Phone +49 (0)2842 980-211
Olaf.Naumann@vossloh-schwabe.com

Nichia from Japan, the inventor of the white LEDs, has been one of the partners of VS since 1995. The product range includes a comprehensive range of high brightness and high power LEDs, as well as a UV LED product range covering all power classes.

Your contact: Ulf Hilsenberg

Phone +49 2842 980-213
Ulf.Hilsenberg@vossloh-schwabe.com