|
The documentation provided by Vossloh-Schwabe is carefully researched. Technical advice is given to the best of our knowledge. The details on the product or the type plate are binding in every case.
Any manipulation of VS products or product packaging is illegal and violates registered trademark rights. Manipulations can negatively influence or destroy technical properties and can possibly result in secondary damage. Vossloh-Schwabe does not accept any liability for manipulated products and cannot be held responsible for any secondary damage.
Manufacturers of luminaires and lighting systems remain responsible for the selection of suitable luminaire components, e.g. operating devices and lampholders, and component materials just as for their safe and correct installation in line with luminaire and system set-up regulations.
Particular attention should be paid to the following:
• temperature measurements and temperature limits
• compliance with creepage and air clearance distances and insulation thicknesses
• selection of components to suit their operating conditions and degree of strain
(e.g. voltage, current, mechanical loading, UV radiation)
• protection against contact and safe protective earth conductor connections
• resistance to corrosion
|
|
The product drawings contained in this catalogue only feature nominal dimensions. For space and simplicity reasons, the full dimensions and particularly the associated tolerances cannot be shown. For details of luminaire design, please request our in-depth dimensional assembly drawings.
All VS products comply with the relevant standards and are developed and produced using
the latest technological expertise.
All dimensions that are specified in this catalogue without tolerances are nominal dimensions,
which are defined according to the following norms:
• ceramic parts: DIN 40680, medium
• metal parts: DIN ISO 2768, medium
• plastic parts: DIN 16901, group 130
To ensure safe luminaire production we do not recommend reusing dismantled lampholders.
|
